[time-nuts] HP5065A upgrade kit H10

timeok at timeok.it timeok at timeok.it
Tue Jun 16 07:26:33 UTC 2015

Hi all,

I have developed an upgrade kit for the HP5065A. 
This add one or two 10MHz outputs and can be installed in all the units have the HP10811 as OCXO.

The main features of this amplifier-separator are:

Very low residual phase noise, typical -150dB @ 1Hz
High reverse isolation typical 110 dB
High input impedance do not load the HP10811 output
High output power handling on 50 Ohm settled to +15dBm (as the others HP5065A outputs)
Output GND isolated to avoid the low frequency current loop

The Option H10-1 have one single 10MHz output
The Option H10-2 have two separated 10MHz outputs

The option is assembled ready to install and is complete of all the connectors, cables and others components are needed. 

You can find the installation manual with pictures here: http://www.timeok.it/files/hp5065AoptH10v101.pdf

Visit also my HP5065A corner here: http://www.timeok.it/HP5065_corner.html

If you are interested, please email me:   timeok at timeok.it

Best regards,

> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts [1]
> and follow the instructions there.

Message sent via Atmail Open - http://atmail.org/

More information about the Time-nuts_lists.febo.com mailing list