[time-nuts] Lady Heather Server On Raspberry Pi 2 Model B?
mgeorge at tuffmail.us
Tue Jan 12 14:40:04 UTC 2016
A few recommendations for troubleshooting.
In /etc/ser2net.conf comment out the 4 default lines (/dev/ttyS0-3)
so that the line Nick provided is the only config present.
Make sure ser2net is running:
ps -ef | grep ser2net
If not, tail /var/log/syslog and see if any errors were reported on
Normally you just see a single line reporting successful startup.
If it is running , make sure it is listening on the socket you specified
netstat -tln | grep 3200
you should see a line with 0.0.0.0:3200 under local address
There is additional troubleshooting you can do depending on results
of above steps.
On 1/12/2016 03:58, Ed Armstrong wrote:
> More details please. I've installed it, but can't make it work. My
> USB/serial cable is /dev/ttyUSB0 just like yours. I used your .conf
> file. But lady heather says connection rejected.
> On 1/11/2016 8:00 PM, Nick Sayer via time-nuts wrote:
>> I answered my own question. :)
>> ser2net works perfectly as a “server” for LH. I’m using a USB to
>> serial adapter and the ser2net.conf line for it is
>> 3200:raw:0:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT LOCAL
>> And for LH, /ip=n.n.n.n:3200 works.
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com