[time-nuts] Generating a solid PPS from 10Mhz source
nsayer at kfu.com
Wed Jan 13 14:43:12 UTC 2016
If anyone is interested in the equivalent functionality using an ATTiny25 (for instance, if you’re already heavily invested in AVR instead of PIC, like I am), ping me. I’ve privately written code to solve almost the same problem and it could easily be adapted into doing the same job.
> On Jan 13, 2016, at 5:23 AM, Edesio Costa e Silva <time-nuts at tardis.net.br> wrote:
> Try TVB's picDiv at http://www.leapsecond.com/pic/picdiv.htm
> On Wed, Jan 13, 2016 at 09:22:09AM +0000, Jerome Blaha wrote:
>> Hey Guys,
>> Is there an easy circuit to build that can consistently deliver a 1 PPS from a 10MHz source with excellent resolution and repeatability? My first application is to test different 10MHz oscillators without a TIC always attached and then compare the PPS output change over time against a master GPSDO PPS with an HP53132A.
>> The circuit used for PPS generation would have to deliver consistent PPS output with preferably not more than 100ps noise or jitter, assuming a perfect source. I'm totally guessing that for this resolution, the PPS would have to be generated and accurate to within 0.001Hz every second. If this is too difficult, maybe the integration time can be increased to generate one pulse every 10second or every 100,000,000.00 cycles?
>> Finally, is a square 10Mhz reference any better in this case than a sinusoidal input for generating the PPS?
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com