[time-nuts] S200 PS
cjaysharp at gmail.com
Wed Oct 4 21:29:30 UTC 2017
It's a very standard supply, RS do them for instance:
There are plenty of uncased ones for a lot less if you're willing to do
some metal bashing.
On 4 October 2017 at 22:20, Lists via time-nuts <time-nuts at febo.com> wrote:
> I should have said, I’m based in the UK, so pointers to US suppliers
> aren’t much help, but thanks for taking the time to reply.
> I’ve replaced the opto-coupler, it was an 817 device, got a couple off
> ebay brand new for pennies, still not working though :-(
> I’ve also ordered a new MOS FET which should be here by the weekend, so
> we’ll see if that helps. At this rate It will be a whole new PSU by the
> time I replace the faulty part! Assuming of course it’s not the
> transformer, in which case I’m stuffed.
> The problem with buying a new PSU is finding one that fits, all the ones
> with suitable outputs I’ve found so far are the wrong shape/size.
> > On 3 Oct 2017, at 04:54, martinm at soundtech-lg.com wrote:
> > Chris,
> > There is a PowDec Tech SMPS PCBA on ebay PTE43-34 ebay item
> > 322751890408
> > The S200 PS is a PTE43-31. +5V+12V-12V. The one listed is 5V+15V-15V
> > $20 Probably few components need to be swapped.
> > Here is the spec sheet for the PTE43 series with a nice photo... oem
> > for sure:
> > https://www.sager.com/_resources/pdfs/product/PTE43.pdf
> > Martin
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to https://www.febo.com/cgi-bin/
> > and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> and follow the instructions there.
*No trees were harmed in the sending of this mail. However, a large number
of electrons were greatly inconvenienced.*
More information about the Time-nuts_lists.febo.com