[time-nuts] current crop of GPS receivers for Rpi/Beaglebone for NTP server/etc
whisky74656 at gmail.com
Mon Oct 16 19:12:30 UTC 2017
and I'm happy with it. Good instructions.
On Mon, Oct 16, 2017 at 2:46 PM, Hal Murray <hmurray at megapathdsl.net> wrote:
> I don't know of any no-wire setups for the Beaglebone. (I somewhat
> one, but it included something else I didn't need and the price was high
> enough that I ignored it.)
> If anybody finds one, please let us know.
> There are at least 3 GPS HATs for Pis.
> The first two include a patch antenna. Depending on your location, you may
> be able to run without an external antenna. The Adafruit has a tiny u.FL
> connector rather than a SMA so it fits into a normal enclosure with no
> You need to solder on the 40 pin header.
> SKU 424254:
> (I haven't tried one.)
> See Davit Taylor's msg for the US source.
> The old(er) Uptronics board had the antenna connector going out the end
> rather than the side. That doesn't fit with new Pis that have 4 USB slots.
> On older Pis, it puts the cable in the slot between 2 connectors. You can
> use old enclosures by just breaking off one tab.
> Lots of info here:
> You may have to dig to find the stuff you are interested in.
> These are my opinions. I hate spam.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com