[time-nuts] Re: HP5065A A7 series 960 for sale

[Bill Notfaded]

Corby-

So I already have the frame in mine?

Bill

On Tue, Sep 24, 2024, 3:30 PM cdelect--- via time-nuts <
time-nuts at lists.febo.com> wrote:

> Hi,  When I get a pre-series 960 5065A in I always replace the -6010 A7
> module with the newer -6080 unit. Recently while refurbishing an older unit
> I realized I was getting close to running out of -6080 spares. I had a
> quantity of the -6010 that had been removed so I went ahead and got a board
> made with nine of the -6080 on it. Have finished up converting all the
> -6010 to -6080  I have a few fully populated and tested boards that I will
> be selling. In the PIX you can see the new holes drilled in the -6010
> cases, the 3 units I am selling (one has the frame but I did not have
> another cover.), and the info on moving two resistors on the A8 board. If
> you don't reconfigure the resistors then you might not be able to do the
> phasing alignment.The boards are also labeled with the measured fundamental
> filter frequency. You should adjust the pot on the A8 to set it to the
> corresponding value. This also greatly helps when doing the phasing. Price
> is $106.00 US and that includes the USPS shipping. First taker can have the
> one with the frame if they want. Paypal or check. Cheers,
> Corby_______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com