[time-nuts] Re: 5065A Oscillator replacement

[john at miles.io]

Please do.  It'd be especially nice if a board exists with a good 10 MHz
isolation amp.

-- john

-----Original Message-----
From: Ulf Kylenfall via time-nuts <time-nuts at lists.febo.com> 
Sent: Friday, July 10, 2026 2:08 AM
To: Discussion of Precise Time and Frequency Measurement
<time-nuts at lists.febo.com>
Cc: Ulf Kylenfall <ulf_r_k at yahoo.com>
Subject: [time-nuts] 5065A Oscillator replacement


FWIW:
Regarding the 10811 "adapter" module used in 5065A...
I have a design for the 10811-oscillator back PCB that includesa 10 MHz
"Sniffer" SMB connector. The board is a drop-inreplacement. The SMB
connector is to be soldered ontothe back/secondary side of the PCB and a
hole has to be drilledin the metal frame. That facilitates a connecton to be
routed outsafely.
I use this borad in my own 5065A.
Can upload the design if there is an interest in it.
Regards
Ulf KylenfallSM6GXV
_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com To unsubscribe send an
email to time-nuts-leave at lists.febo.com