[time-nuts] HP E3610A Power supply
brooke at pacific.net
Thu May 22 19:12:19 UTC 2014
My E3617A has a front panel adjustment screw for Over Voltage Protection.
Does the E3610 have that?
EWKehren at aol.com wrote:
> This may be off topic but I did check with Tom and many time nuts may have
> HP E3610A power supplies on their bench and mine smoked a ublox GPS so that
> makes it topic related..
> The reference section has some 1 uF 50V capacitors and in my unit one
> shorted. The reference section has fuses on the board but they did not open. The
> 7912 overheated and shorted out, traces are discolored the op amp shows
> signs of overheating and burned out. The result was the output went to 30V+
> and next morning the ublox chip plastic showed where the chip smoked. As
> a minimum I recommend replacing the 1 uF capacitors with new quality caps,
> I also ordered 15 V 5 W zeners and 0.5 A 20 mm glass fuses.
> Bert Kehren
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com